Welcome, Guest ( Login )

VICTRON Blue Smart IP65 Charger with DC connector 12V 10A

VICTRON Blue Smart IP65 Charger with DC connector 12V 10A
VICTRON Blue Smart IP65 Charger with DC connector 12V 10A
VICTRON Blue Smart IP65 Charger with DC connector 12V 10A
 
Our PriceAUD$266.65
CodeBPC121031014R
 

Victron Blue Smart Charger 12V 10A

  • Water, dust and chemical resistant
  • Seven step smart charge algorithm
  • Recovery of fully discharged 'dead' batteries
  • Automatic power supply function
  • Servere cold performance: down to -30°C
  • Several other battery life enhancing features
  • Low power mode to charge smaller batteries
  • Li-ionbattery mode
  • Setup and configure, readout of voltage and current byBluetooth Smart

Ultra high efficiency "green” battery charger
With up to 95% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0.5 watt, some five to ten times better than the industry standard.

Temperature compensated charging
The optimal charge voltage of a lead-acid battery varies inversely with temperature. The Blue Smart IP65 Charger measures ambient temperature during the test phase and compensates for tempera - ture during the charge process. The temperature is measured again when the charger is in low current mode during float or storage. Special settings for a cold or hot environment are therefore not needed.

Li-ion battery mode
The Blue Smart Charge r uses a specific charging algorithm for Li-ion (LiFePO?) batteries, with automatic Li-ion under voltage protection reset.

The VictronConnect app
Setup, readout and configure your Blue Smart IP65 Charger via your smartphone. You can display the status of your charger and battery and even control the functions of your charger using the VictronConnect app. On your screen the readout of voltage and current is default available.





Please review these other products:

 
VICTRON VE.Direct Bluetooth LE Dongle

The VE.Direct to Bluetooth Dongle lets you display the information from your BMV or MPPT to your smart phone using the Victron Connect app.

Using your iPhone or iPad you can wireless view information on your power system, giving you the ability to check your battery status, solar panel power, and other information.

The VE.Direct Blutooth dongle is able to read data from the BMV700 and BMV702 battery monitors and Victron MPPT Solar Charge Controllers (excluding 150/70 and 150/85) using the VE.Direct communication port.

Victron Connect app

The Victron Connect app connects to a Victron VE.Direct Bluetooth LE dongle and gets live status information from a Victron BMV700 or Victron MPPT.

Download for iPhone and iPad


Our Price: AUD$99.25

click to see more